Friday, November 18, 2016

Section: 37
Hours: 5

The weather was good today and the paint had cured enough on the roll bar parts so I decided to work on fixing the streaks and drips from painting earlier in the week. I sanded down the roll bar and support pieces with 320 grit sand paper, used dry. Then I scrubbed with maroon scotch brite pads and wiped everything down with lint free rags lightly soaked with 90 proof rubbing alcohol. I catalyzed 3 oz. of EkoCrylic and shot on another 2 fog coats and a final wet coat. I didn't get any runs today and the paint covered without streaks.

No comments:

Post a Comment