Wednesday, November 2, 2016

Section: 34
Hours: 1

I cleaned out the insides of the flap torque tubes by running scotch brite pads through and then taped up the holes and ends of the tubes. I decided to use Rust-oleum clean metal primer for the insides of these tubes. I sprayed a heavy coat inside the tubes and rolled the tubes to evenly spread the primer and then set the tubes on end to drain the excess paint.

Section: 35
Hours: 4

I spent the rest of the day installing the upper forward fuselage assembly.

The bulkheads rivet to the firewall.

Here's the attachment to the upper longeron.

No comments:

Post a Comment