Section: 6
Hours: 8
After reading numerous other builders blogs, thousands of Van's Air Force Forums and last but not least the amazing construction manual that came with the kit, I dove into actual construction today. I deburred, dimpled, drilled, clecoed and spent lots of time admiring the fit and finish of the vertical stabilizer parts.
Disclaimer: This blog is to provide others insight into my experience and for my own historical purposes. Airplane construction is a serious affair. I have no authoritative skills relating to airplane construction. As such, any use of the information contained on this blog is at your own risk.
Saturday, May 31, 2014
Wednesday, May 21, 2014
I ordered the RV Tool Kit from Isham and have been slowly cleaning out the garage. I also spend a month rewiring the electrical service for the garage. I dug a trench from the house main panel to the garage and my brother in law added a new subpanel in the garage. We installed additional 110 and 220 circuits and added numerous wall sockets.
Today I cut lumber and assembled a couple EAA 1000 workbenches. EAA Workbench
Today I cut lumber and assembled a couple EAA 1000 workbenches. EAA Workbench
Subscribe to:
Posts (Atom)