Friday, June 17, 2016

Section: 26
Hours: 3

This morning I finished up riveting the baggage ribs to the bulkhead. I used the long bent stick in the rivet gun to reach these rivets.

The routing angles get in the way for riveting the center ribs. It took some real finessing to set the rivets in the inboard ribs.

I set the assembly on end on blocks on the floor and clecoed the baggage ribs. Tomorrow I hope to get some help riveting them to the skin.

Section: 27
Hours: 3

This afternoon I pulled the parts for the firewall assembly and started work filing, deburring, counter sinking, etc.

No comments:

Post a Comment