Wednesday, October 21, 2015

Section: 10
Hours: 8

After attaching the side skins you install the rear deck. I was able to squeeze most of the rivets in this area, but there were some AN470AD3 rivets that I had to shoot with the rivet gun. A couple of those were really squirrely and I had to drill them out and retry a couple times. Also, be careful in this area. The rivet lengths called out in the plans are incorrect in a couple spots. Make sure you use your rivet length measure tool and grab the right length rivets.

With the deck installed I was able to straighten out some of the wire runs.

No comments:

Post a Comment