Friday, November 29, 2019

Section: 38
Hours: 6

The epoxy has cured so I sanded the skin coat on the canopy.

I had also skin coated the empennage fairing. Today I sanded it down and applied primer.

Unfortunately, it looks like the skin coat I applied with the foam roller brush did not fully penetrate all the pin holes. This part did not have a gel coat and had lots of pin holes. I will have to sand off the primer and reapply epoxy using a squeegee. Here's a good writeup on SkimCoating.

Pinholes - gaaack!!!!

No comments:

Post a Comment