Section: 43
Hours: 5
I decided to use a B&C BC410-H backup alternator since I will have an all electronic panel. I installed the alternator. The lower right bolt is very difficult to reach and required a special snap-on wrench. The gasket is sealed using Loctite 518.
Today I also added various fitting to the back of the engine. Many of the fittings have a recommended clocking. I used the adjustable protractor to set the angles.
Disclaimer: This blog is to provide others insight into my experience and for my own historical purposes. Airplane construction is a serious affair. I have no authoritative skills relating to airplane construction. As such, any use of the information contained on this blog is at your own risk.
Friday, June 1, 2018
Thursday, May 31, 2018
Section: 43
Hours: 3
Used the engine hoist to pull the engine out of the crate. I will be installing 2 pmags so the first order of business was to pull the slick magnetos. I will also have to pull the gear off off of the back of the slick magneto and transfer it to a pmag.
Hours: 3
Used the engine hoist to pull the engine out of the crate. I will be installing 2 pmags so the first order of business was to pull the slick magnetos. I will also have to pull the gear off off of the back of the slick magneto and transfer it to a pmag.
Wednesday, May 30, 2018
Monday, May 28, 2018
I received notice that my best friend Richard Bristow and his wife were killed today. They had just taken off from Petaluma in his RV6 when the engine stopped. The plane stalled and dove into the ground when it was turned back to land, killing them both. I have flown hundreds of hours with Richard for many years and made many cross country trips to Oshkosh with him. He was a knowledgable and experienced pilot. It is just impossible to understand why he tried the impossible turn. I will miss them both more than words can describe...
I first met Richard through the Mooney Caravan. We were both from the Sacramento area and met up before I flew to my first Oshkosh in 2003. After that we would frequently fly our Moonies to various burger spots around NorCal.
In 2005, Richard arranged for us to attend the Beechboys formation training clinic in Stockton. After the clinic, we started meeting up Thurs. afternoons to practice 2 ship. We called it Thursday supper club. We gradually improved our formation skills and then worked on convincing the Mooney Caravan group to transition from gaggle to formation. It was a slow process, but by 2012 the Mooney group fully transitioned to formation arrival. In the mean time, Richard and I flew 100's of hours in formation around NorCal and back and forth to Oshkosh every year.
Richard sold the Mooney and purchased an RV6 in 2012 and soon after started prodding me to pursue my dream of building an RV. He was there when I placed my order at Oshkosh 2013.
I first met Richard through the Mooney Caravan. We were both from the Sacramento area and met up before I flew to my first Oshkosh in 2003. After that we would frequently fly our Moonies to various burger spots around NorCal.
In 2005, Richard arranged for us to attend the Beechboys formation training clinic in Stockton. After the clinic, we started meeting up Thurs. afternoons to practice 2 ship. We called it Thursday supper club. We gradually improved our formation skills and then worked on convincing the Mooney Caravan group to transition from gaggle to formation. It was a slow process, but by 2012 the Mooney group fully transitioned to formation arrival. In the mean time, Richard and I flew 100's of hours in formation around NorCal and back and forth to Oshkosh every year.
Richard sold the Mooney and purchased an RV6 in 2012 and soon after started prodding me to pursue my dream of building an RV. He was there when I placed my order at Oshkosh 2013.
Richard pointing at me and telling the Van's rep, "I told Ernie to stop waffling and buy the kit. Where's my commission?"
Richard encouraged me every step of the way in the construction. Every week I would get a call and he would ask how the project was going and if I needed help. He helped buck many rivets. He had a large hanger at the airport and we were going to have only RV's in the hanger when I finished mine.
It is hard to imagine continuing the project without Richard's help and encouragement.
RIP
Friday, May 25, 2018
Monday, May 21, 2018
Section: 38
Hours: 5
Primed some parts and applied a coat of pinhole filler to the canopy fillet today. I won't describe the pinhole filler because I wouldn't do it this way in the future. Better to use epoxy/micro balloons.
Hours: 5
Primed some parts and applied a coat of pinhole filler to the canopy fillet today. I won't describe the pinhole filler because I wouldn't do it this way in the future. Better to use epoxy/micro balloons.
Sunday, May 20, 2018
Section: 44
Hours: 4
I worked on the spinner plate assembly today. I marked the cutout area on the spinner plate using the doubler ring and then drilled a series of holes just inside the mark. Next I used the dremmel cutoff wheel to trim closer to the mark and finally used the dremmel drum sander and files to cut to the final mark.
Hours: 4
I worked on the spinner plate assembly today. I marked the cutout area on the spinner plate using the doubler ring and then drilled a series of holes just inside the mark. Next I used the dremmel cutoff wheel to trim closer to the mark and finally used the dremmel drum sander and files to cut to the final mark.
Subscribe to:
Posts (Atom)




















