Wednesday, November 10, 2021


Hours: 8

I had a local sign shop prepare registration number decals and I applied them to the vertical stab. I used masking tape on the top edge of the decal to position and hold it in place. Then I removed the back carrier layer and rubbed the letters down and finally I peeled off the top carrier film.

Today I also finished sanding the canopy fillet and spayed on a couple of primer coats. The fiberglass is now completed on the rebuild.

I recently got the replacement foam seals from Van's. They had been back ordered for some time. Today I installed the foam seals and installed the canopy back on the airplane.

No comments:

Post a Comment