Thursday, June 28, 2018

Section: 47
Hours: 5

Today I installed the baffling. One tricky part is the screw that goes into the lower right back of the engine. It screws into an insert that is hidden in a port in the engine case. When I first removed the screw, I heard something drop on the floor. Luckily it dropped where I could easily find it and I figured out what it was. To attach the baffle in this area, you have to push the insert into the port hole in the engine case, line up the hole in the insert and then thread the bolt in all while holding the insert in place. Not and easy job...

Here is the rest of the baffling installed.

A large box from Flightlines Interior arrived today!

No comments:

Post a Comment