Wednesday, October 30, 2019

Section: avionics
Hours: 5

I got to the P1001 connector after much disassembly. Not only are the pins bent, but they are loose and easily wobble around in the plug (pins on lower side of connector in photo below).

I do not think this plug can be repaired. I am going to ask SteinAir to wire up a new plug with a harness that will plug into the good pins of the existing connector. I will bypass the broken pins with jumpers directly to the new connector. I will also have to move the cooling fan wires and the sim module to the new plug.

No comments:

Post a Comment