Section: 32
Hours: 6

Today I put in the flap motor channel and the baggage compartment side panels.

Here's the new pull rivet gun in action shooting a rivet into the baggage floor splice.

The flap motor channel really stiffens up the seat back brace. The motor brackets were a little tricky to fit in and rivet. I used the squeezer for the rivets that go into the seat back brace and used the rivet gun for the rest.

Here's the channel and splice riveted in place.

Lots more pull rivets went into the baggage side wall panels. I hand pulled about half the rivets in these because the gun wouldn't fit.